DNA Fusion Version 7.1

RELEASE DATE(s): March 28, 2018- September 14, 2018

 

 

VERSION 7.1.0.46
RELEASE DATE September 14, 2018
MERCURY FIRMWARE 1.25.6 (SSP-D2, SSP-EP, SSP-LX, DController)
 

Improvements

  • Added Last Operator field to Personnel record to indicate last operator that modified non-card related Personnel data fields
  • Implemented Graphics Maps debugging capability into DNA Fusion Client to help diagnose duplicate tags
  • Implemented the ability to execute Direct Commands containing non-Mercury based commands (i.e. Isonas, Axis) via Mobile and Web Apps
  • Added Error message around any failure to save Graphics maps
  • Altered the way Firmware is shown on the SSP Status screen to match Mercury's notation. Also now showing cumulative build count when firmware is 1.26.4 or greater
  • Finalized LP Series controller Integration
  • Added advanced door functions to mode control list when dragging/dropping a door to a macro

Bug Fixes

  • Fixed an issue with acknowledging an alarm when another alarm comes in
  • Fixed an issue where Trace History For Non-Access related Hardware Events (monitor point, door mode, etc.) not returning results with tenants enabled
  • Fixed an issue where Trace History for Cardholders causes errors if the EmpID or SSN fields are selected
  • Fixed an issue where the option to hide Non-Tenant Personal Data is not hiding the EmpID or SSN data on the Trace History Dialog
  • Fixed an issue where if running Tenants w/o the Tenant SSP filters turned on it would still try and filter hardware on a Trace History
  • Fixed an issue where Setting Temporary ACR Override Mode (Mercury) to minutes was not working properly
  • Fixed - Host Based Macro from MP failed to load default camera or show wrong error message if default camera was not defined
  • Fixed an issue preventing operator from removing person from personnel group with right click context menu
  • Fixed an issue with Date & Time in the Updated field in Cardholder tab for the Personnel View not updated
  • Fixed an issue with UTAG settings not being stored correctly causing downloads after Online/Offline and restart
  • Fixed an issue where Card Downloads could become "stuck" in some cases when large quantities of panels issued full downloads
  • Fixed an issue where MPG Status was not showing MPG 1
  • Fixed an issue where clicking on the State Icon in the MPG Grid would select/deselect all sub items
  • ASSA - Fixed an issue with Direct Commands not working correctly when executed from a Host Based Macro on the Driver
  • ASSA - Fixed an issue where ASSA levels were not copied over when adding a new card belonging to Personnel Group with Default Access Levels

 
VERSION 7.1.0.37
RELEASE DATE July 20, 2018
MERCURY FIRMWARE 1.25.6 (SSP-D2, SSP-EP, SSP-LX, DController)
 

Improvements

  • Added ability for operators to right click on a card in the Personnel Tree to launch "Has Access To..." dialog
  • Added new operator Privilege to control access to the 'Has Access To
  • Added Support for ASSA Door State Status of "None", which is treated as "Closed" to avoid showing Door as Unknown or In Alarm
  • OpenDX - Improved logging/debugging for easier troubleshooting
  • ASSA - Added some additional logging around adding/removing users from Authorizations
  • ASSA - Updated the DsrUtility (1.8.0.5) to give the operator a chance to restart the driver when exiting the utility if it had been stopped
  • ASSA - Updated the DsrUtility to remove "orphaned" users from the DSR.AuthorizationUsers table when executing a refresh
  • KONE - Improved logging (v1.0.0.6)
  • ISONAS - Added driver support for the V2 Bridge Products
  • ISONAS - Improved default logging parameters to allow dual file/interactive logging by default

Bug Fixes

  • Fixed an issue where Status bar did not update when site was un-linked
  • Fixed an issue where adding Access Areas from different nodes behaved differently or didn't work (i.e. SSP Node vs. Areas Root Node vs Areas node)
  • Fixed an issue with possible card downloads being blocked if panels reset
  • ASSA - Fixed an issue where removing Users from DNA did not always remove the card from the DSR

VERSION 7.1.0.36
RELEASE DATE July 9, 2018
MERCURY FIRMWARE 1.25.6 (SSP-D2, SSP-EP, SSP-LX, DController)
 

Improvements

  • Added the ability to Edit the Macro associated with a trigger from the context of the Trigger.
  • Changed descriptions on Report Parameter Dialog for Employee ID/SSN to be consistent with Personnel Screen.
  • Improved memory allocation for the handling of card downloads for sites with large database and multiple controllers.  Also added a configurable delay command between controller downloads.
  • Added ability to associate the data from a card read using trigger codes (for use in Emails, etc.) with a Trigger and use replaceable parameters with information from the card read from that reader as though it was an access transaction.
  • DNA Driver (along with OpenDX version 6.10 or later) now supports Adding the Default Access Levels associated with Personnel Groups.  This includes individual ASSA levels as well as Groups. Currently, there is no UI setting for this so the ImportSettings.ini needs to be modified manually to include the 'AllowDefaultLevels=1' setting under the [General] section.
  • OpenDX - Ensuring the KeyCard Destination follows the Allow Duplicates setting in DNA Fusion.
  • OpenDX - Ensuring the "Assign Access Levels to Inactive Cards" setting in DNA Fusion when applying an Access Level Group via OpenDX.
  • ASSA - Improved the SmartInspect Logging - Assa Specific file based logs are now stored in the same way other integrations with no configuration file needed.  Also, added some additional logging around adding/removing users from Authorizations.
  • ASSA - Updated the DSR Utility (1.8.0.3) to use new Card Encoding Features for Reversing Bits and Bytes.
  • ISONAS Driver - Modified to essentially implement download on demand.  If card is badged and is not on the panel it will be downloaded immediately if it's supposed to be in that panel.
  • Streamlined event filter queries when dragging controller to grid for better result speeds.

Bug Fixes

  • Removed all references to the legacy Embedded Video setting.
  • Updated some misleading verbiage that could occur when Force arming MPG with active points.
  • Fixed an issue where the Has Access To Dialog did not show Mercury Precision Doors.
  • Fixed an issue where the Has Access To Dialog did not show the Door Address column on some displays and operator was not able to expand it.
  • Fixed an issue where Peripheral Status for Panels was not set when starting up client (all panels showed offline until Alarm Panel Driver restarted)
  • Fixed an issue that occurred when pulsing an Elevator Floor Via Host Based Macro resulting in unlocking all floors.
  • Fixed an issue with the Export button on the Non-Use Report showing disabled.
  • Fixed an icon resource issue with Live Graphics tool bar.
  • Fixed several issues with Auto Email on inactivity.
  • Fixed an issue with grid settings that would show up on older systems.

VERSION 7.1.0.31
RELEASE DATE June 4, 2018
MERCURY FIRMWARE 1.25.6 (SSP-D2, SSP-EP, SSP-LX, DController)

New Features

  • ISS Video Integration
  • HIKVision Video Integration

Improvements

  • Added support for custom headers in the HTTP functionality of Host-Based Macros.  This allows replacement text to be used when sending http commands to 3rd party systems.
  • Moved Direct Command functionality via Host-Based Macros to the Driver.  This allow most commands to be executed without DNA Fusion application running.
  • Changed the behavior of the Copy Triggers Dialog so that any existing check marks are not cleared when executing a copy.  This allows operators to copy/paste the same set of commands across numerous macros without having to recheck individual commands.

Bug Fixes

  • Fixed connection issues with NDE/PIM functionality on the SSP-D2 and SSP-LX.  Only supported on firmware versions 1.25.6 and later
  • Fixed an issue Filtering Events Grid by Operator which caused an error message and failed to execute filter.

VERSION 7.1.0.29
RELEASE DATE May 21, 2018
MERCURY FIRMWARE 1.2.41 (SSP-D2, SSP-EP, SSP-LX, DController)
 

Improvements

  • Added support for executing Temporary Override modes in seconds
  • Otis Front/Rear Elevator Setup: Prompt User for proper Max Floor value
  • Added ability to right click on the Alarm Grid to launch associated Personnel record dialog if the record is related to cardholder
  • Added HTTP Host Based Macro to be able to add replacement text to post data
  • Added a Clear Selected Alarm Operator privilege
  • Added ability to enter Canadian Postal Codes (must accept at least 6 characters and handle alpha characters)
  • Improved Filtering Time Schedules - Changed this behavior to be an option so customers can choose how it behaves
  • Added the DVR SDK Version to the DVR Properties Dialog
  • Added Camera option to Output points.
  • Added Created Badge Report
  • Added support for Mercury Simulated Card Read as a Macro
  • INSTALL - Updated Schlage Over the Network firmware to AD.A.110
  • INSTALL - Added support for .Net 4.5 dependency

Bug Fixes

  • Fixed an issue with Elevator Override Mode for Otis DDS - The level number of a floor group is offset by one.
  • Fixed an issue preventing set up of Kone DOP with an ID out of sequence (i.e. set up ID 3 first)
  • Fixed an issue with multi-card editing causing fatal error
  • Fixed an issue where if no grid settings are in the database the system would crash reading from registry
  • Fixed an issue where Reader/LED Config were disabled on non OSDP Master/Slave Readers attached to a door
  • Fixed an issue with Editing/Adding Macros that could result in incorrect positioning of the Macros in the browser after closing dialog.
  • Fixed an issue where switching FC modes changes the existing facility code to 0
  • Fixed system not allowing more than 16 SIOs on SSP-C
  • Fixed PIM Door Linking Dialog showing incorrectly
  • Fixed an issue that prevented editing host based macro when multi-editing door
  • Fixed an issue (Otis) Default Floors and Card Holder Flags not sent correctly to controller
  • Fixed an issue where if there are no SSPs the Non-Use report generates an error message about invalid SQL
  • Fixed  - SIO Firmware downloads fail with invalid file names.
  • Fixed (Kone) where editing a Linked Doors Description also updates the description of any linked DOP
  • Fixed an issue with External Card Removal (From OpenDX) which could leave the card in the panel (Isonas and Axis)
  • Fixed an issue where Multi Edit of Monitor Points can lead to incorrect values when using Latching/Non-Latching Modes
  • KONE Driver Update (1.0.0.4) - Issue with Multiple Groups using "Shared/Global" DOP - The Global Masks could be wrong if floors between groups had overlap.
  • KONE Driver Update (1.0.0.5) - Change transaction data to include floor names in addition to native Kone Addressing
  • ISONAS - Fixed an issue where deleting a card is not properly being handled in the Isonas Integration - Card will remain in panel
  • ISONAS - Fixed an issue in logic used to handle activation/deactivation of cards. Cards with activation dates in the future were not being downloaded to the controller.  (note: this also requires version 1.0.0.25 of the Isonas Driver)

VERSION 7.1.0.24
RELEASE DATE April 9, 2018
MERCURY FIRMWARE 1.2.41 (SSP-D2, SSP-EP, SSP-LX, DController)

Improvements

  • Reworked the execution of Direct Command from the UI so that they are executed from a different thread than the UI
  • Added the ability to reverse the bytes in a custom ASSA card format
  • Reworked how SIO downloads (109) are handled for PIM400s (do not send if the SIO is already online)
  • Added support in the driver for expanded event information from the older alarm panel integration for DMP

Bug Fixes

  • Fixed an issue where when removing holidays did not cause the controller to be updated (ISONAS)
  • Fixed issue where when editing personnel custom fields it did not detect changes, so closing dialog without saving will not prompt user resulting in lost edits
  • Fixed issue where ASSA updates from external sources (OpenDX) are not enabled unless you have a license for Axis or ISONAS (not ASSA)
  • Fixed issue where trace history on doors will exclude all non-access events
  • Fixed issue where the default holiday set was not showing on a fresh install
  • Fixed issue where when adding a new card and setting the activation date to 00:00:00, it would reopen as 00:01:00
  • When editing the contents of 'Drop List Data', fixed issue where setting up custom fields would not allow the ENTER key without closing the dialog

VERSION 7.1.0.22
RELEASE DATE March 28, 2018
MERCURY FIRMWARE 1.2.41 (SSP-D2, SSP-EP, SSP-LX, DController)
 

New Features

  • Added support for Mercury Series 3 Subcontrollers
  • Kone Elevator Support

Improvements

  • Added support for SSL in the Driver based HTTP mechanism
  • Added TLS support for SMTP Component in Driver
  • Implemented new encryption used to store operator passwords in DNA
  • Added the ability to "Group By" Title
  • Updated Email Dialog on the Events Grid to dismiss after hitting the Send Button
  • Updated IPWorks code in the driver (and client) as it relates to using SSL
  • Added the option to use URL encoding on a Host Based Macro level of granularity for Driver based HTTP Host Based Macros
  • Added Capability to show either EmpID or SSN Columns in Trace History results for Access Related Events – This is available via right click on the grid.
  • Added the Event Data column to the Trace History Dialog - This is available via right click on the grid.
  • Extended Entry/Exit Delays on monitor points to maximum 65535 seconds
  • Updated the Door Status Dialog verbiage as it relates to the handling of some Mercury readers (specifically PIM/Aperio/NDE/OSDP) to better reflect the status
  • Adding Access Levels from DNA Web will properly download card to Isonas/Axis if assigned Access Level
  • Added exception handling at the Login Screen for improved troubleshooting on startup issues
  • Updated the External TCP/IP Thread to be optional (set in site configuration tool)
  • Updated the Mercury Based Time Schedule logic to implement intervals in accordance with the Mercury specification
  • Expanded width of Host Based Macros drop down in the Door Properties page to display long entries
  • Added support for new Mercury Transaction Codes (Events 483-486) Events are Load OSDP File, Delete OSDP File, Transfer OSDP File, and Invalid Login Limit Reached
  • Added support for external systems to add ASSA Users and Access Levels (requires OpenDX 6.8.0.0 or greater)
  • Added support for the DController and SSPLX (4502) when promoting controllers
  • Improved download efficiency so editing a card format does not cause a download to occur to panels that do not use the card format
  • Improved download efficiency so right clicking on Personnel/Card does not download to panels unless something has changed on the card record
  • (Isonas) Added the ability to show change of state on the AUX input, create new events for this, and use it in Host Based Macros. New Events are 1700 and 1701
  • (Isonas) Added support for Isonas WIM (Weigand Interface Module) - Requires Isonas driver 1.0.0.22

Bug Fixes

  • Fixed an issue when renaming site where site specific settings (i.e. Download on Demand, SMTP settings) were not recognized by the driver
  • Changed wording when removing precision access level from card
  • Removed hard coded dB references from "Timed Events Report"
  • Fixed status issue with Isonas Root Node in hardware tree
  • Fixed site selection issue with Doors report
  • Fixed an error that occurs when removing All Access from a group when used on a group node created with "Group By" (i.e. Department, Location, etc.)
  • Fixed incorrect queue name on tooltip (root node) for Bosch Panel, TKE, Kone, and Isonas
  • Fixed an issue with Time Schedule nodes collapsing following a time schedule edit
  • Fixed an issue that prevented saving Trigger Codes on a card
  • Fixed an issue with "Always Download" flag not being saved on an existing card
  • Fixed an issue with Deactivation dates not working correctly with group edit from Card tab
  • Fixed an issue where Invert TTL Check box does not save to database and is cross linked with FIPS Checking flag
  • Fixed an issue adding NDE Gateway if there are no SIO licenses available
  • Fixed an issue in Access Level Assignment restrictions that allowed via drag and drop of Access Levels to personnel/cards
  • Fixed an issue with Honeywell PRO22IC Controller resulting in incorrect Physical Address being stored in database
  • Fixed an issue with Activation/Deactivation dates not updating when only making time changes
  • Fixed so that deleting a card with Isonas Access also removes the card from the associated controllers
  • Corrected unnecessary error messages when creating Site from the Link Site Screen
  • (Isonas/Axis) Removing Holidays is not updating to the controller(s)